PLC
S7-200
LED lamps
ABB
All products
The 6ES7532 – 5HD00 – 0AB0 is a SIMATIC S7 – 1500 analog output module manufactured by Siemens, specifically an SM 532 analog output module. Here is the detailed description:
- Basic Information: It is an AQ 4xU/I ST analog output module with 4 channels. The rated power supply voltage is 24V DC, and the allowable range is from 19.2V DC to 28.8V DC, with reverse – polarity protection. The maximum input current is 190 mA when powered by 24V DC, and the power from the backplane bus is 0.6W.
- Resolution and Accuracy: It has a resolution of 16 bits and an accuracy of 0.3%, which can ensure the precise generation of analog signals.
- Output Signal Types: It supports a variety of output signal types, including voltage signals such as 0 – 10V, 1 – 5V, ±5V, ±10V, and current signals such as ±20mA, 0 – 20mA, 4 – 20mA.
- Channel Characteristics: The 4 channels are grouped into one group, with diagnostic functions and the ability to set substitute values. It can support the safety – oriented shutdown of load groups, meeting the requirements of SIL2 according to EN IEC 62061:2021 and Category 2/PL c according to EN ISO 13849 – 1:2015.
- Protection and Isolation: The voltage output has short – circuit protection, and the maximum short – circuit current is 24mA. There is electrical isolation between channels and between channels and the backplane bus, as well as between channels and the load voltage L +. The isolation is tested with 707V DC.
- Performance Parameters: The minimum cycle time of all channels is 3.2 ms, which is independent of the number of activated channels. The minimum load resistance of the voltage output terminal is 1kΩ (0.5kΩ when it is 1 – 5V), and the maximum capacitive load is 1µF; the maximum load resistance of the current output terminal is 750Ω, and the maximum inductive load is 10mH.
- Dimensions and Weight: Its dimensions are 35mm in width, 129mm in depth, and 147mm in height, and it weighs about 310g.
- Configuration and Compatibility: It can be configured via STEP 7 TIA Portal, and is compatible with S7 – 1500 backplane bus, facilitating seamless integration into automation systems.
- Operating Environment: It can operate at a horizontal installation temperature range of – 30°C to 60°C, and a vertical installation temperature range of – 30°C to 40°C, and the maximum operating altitude is 5000m (subject to restrictions when the installation altitude is greater than 2000m).
Reviews
Clear filtersThere are no reviews yet.