NEW 6ES7134-6HD01-0BA1

Basic Information

• Product Type Designation: AI 2xU/I HF, indicating 2 analog input channels capable of handling voltage and current signals, classified as a High Feature (HF) module.
• Usable Base Units: Compatible with BU type A0.
• Color Code: CC11.
• Hardware Functional Status: From FS02 onwards.
• Firmware Version: Upgradable, allowing for future functionality enhancements.

Power Supply Characteristics

• Power Supply Voltage: Rated at 24V DC, with an allowable range of 19.2V DC to 28.8V DC. It includes reverse polarity protection.
• Current Consumption: Maximum current draw from the backplane bus is 60mA.
• Power Loss: Typical power consumption is 1.2W.

Analog Input Characteristics

• Number of Inputs: 2 (fully isolated channels).
• Input Types: Configurable for voltage (±10V, 0-10V, ±5V, 0-5V, ±2.5V) and current (0-20mA, 4-20mA) signals.
• Resolution: 16 bits (including sign bit for bipolar signals).
• Accuracy:
  • For voltage inputs: ±0.1% of full scale (typical) at 25°C.
  • For current inputs: ±0.1% of full scale (typical) at 25°C.
• Input Impedance: ≥100kΩ for voltage inputs; 250Ω for current inputs.
• Sampling Rate: 4kS/s (total for all channels).
• Common Mode Rejection Ratio (CMRR): ≥100dB at 50/60Hz.
• Wire Length: Maximum 1000m with shielded cables.

Advanced Features

• Diagnostics: Comprehensive diagnostic capabilities including power supply monitoring, wire break detection, overrange/underrange detection, and sensor fault monitoring. Status is indicated via LEDs: green PWR-LED (power), green channel-status LEDs, red channel-diagnostic LEDs, and a green/red DIAG-LED (module diagnostics).
• Configuration: Supports channel-specific parameterization (input type, range, filtering) via TIA Portal; includes linearization, scaling, and averaging functions.
• Isolation: 500V AC galvanic isolation between channels and from the backplane bus.

Configuration and Communication

• Supported by configuration tools including STEP 7 TIA Portal (from version V14) and STEP 7 (from version V5.5 SP3).
• Compatible with PROFIBUS and PROFINET fieldbuses, using GSDML V2.3 (PROFINET) and GSD files of revision 3 and 5 or higher (PROFIBUS).

Mechanical and Environmental Specifications

• Dimensions: 15mm width, 73mm height, 58mm depth.
• Weight: Approximately 30g.
• Operating Temperature: -30°C to 60°C when mounted horizontally; -30°C to 50°C when mounted vertically.
• Mounting Altitude: Up to 5000m, with derating requirements for altitudes exceeding 2000m.
• Electromagnetic Compatibility (EMC): Complies with relevant IEC standards for industrial environments, ensuring reliable operation in harsh electrical conditions.