NEW 6ES7131-6BF00-0CA0
NEW 6ES7131-6BF00-0CA0 原价为：$61.00。当前价格为：$58.00。
Back to products
NEW 6ES7132-6BF01-0AA0
NEW 6ES7132-6BF01-0AA0 原价为：$62.00。当前价格为：$58.00。
-5%
Click to enlarge

NEW 6ES7132-6BD20-0DA0

原价为：$75.00。当前价格为：$71.00。

Calculate shipping price

Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.

Add to wishlist
Add to compare
Additional information
Weight 0.16 kg
Dimensions 10 × 10 × 8 cm
Reviews (0)
0 reviews
0
0
0
0
0

Reviews

Clear filters

There are no reviews yet.

Be the first to review “NEW 6ES7132-6BD20-0DA0”

Your email address will not be published. Required fields are marked *

Description

The 6ES7132-6BD20-0DA0 is a digital output module belonging to Siemens’ SIMATIC ET 200SP series. Here’s a detailed description:

Basic Information

  • Product Type Designation: DO 4x24VDC/2A ST, indicating it features 4 digital outputs with 24VDC voltage and 2A current capacity, classified as a standard type.
  • Usable Base Units: Compatible with BU type A0.
  • Color Code: CC02.
  • Hardware Functional Status: From FS02 onwards.
  • Firmware Version: V0.0, which is not updatable.

Power Supply Characteristics

  • Power Supply Voltage: Rated at 24V DC, with an allowable range of 19.2V DC to 28.8V DC. It includes reverse polarity protection.
  • Current Consumption: Maximum current draw from the backplane bus is 50mA.
  • Power Loss: Typical power consumption is 3.5W.

Digital Output Characteristics

  • Number of Outputs: 4.
  • Output Type: Source output (NPN, N-reading), compliant with IEC 61131, type 3.
  • Output Voltage: For signal “1”, the minimum is 20.4V (at 2A load); for signal “0”, the maximum is 1.5V.
  • Output Current: Rated at 2A per channel, with a maximum of 2A per channel and 8A per module (total for all channels).
  • Short-Circuit Current: Limited to 5A (typical).
  • Switching Delay: From “0” to “1” (turn-on) is typically 10µs; from “1” to “0” (turn-off) is typically 10µs (resistive load).
  • Wire Length: Maximum 1000m with shielded cables; maximum 600m with unshielded cables.

Protection and Diagnostic Features

  • Protection: Each channel has short-circuit protection and overload protection. It also offers protection against incorrect wiring of the load voltage.
  • Diagnostics: Capable of monitoring load voltage, short-circuit conditions, and overloads. Diagnostic status is indicated via LEDs (green PWR-LED for power, green LEDs for channel status, and green/red DIAG-LED for module diagnostics).

Configuration and Communication

  • Supported by configuration tools including STEP 7 TIA Portal (from version V14), STEP 7 (from version V5.5 SP3), and PCS 7 (from version V8.1 SP1).
  • Compatible with PROFIBUS and PROFINET fieldbuses, with PROFINET using GSDML V2.3 and PROFIBUS using GSD files of revision 3 and 5 or higher.

Mechanical and Environmental Specifications

  • Dimensions: 15mm width, 73mm height, 58mm depth.
  • Weight: Approximately 32g.
  • Operating Temperature: -30°C to 60°C when mounted horizontally; -30°C to 50°C when mounted vertically.
  • Mounting Altitude: Up to 5000m, with derating requirements for altitudes exceeding 2000m.