NEW 6ES7131-6BF01-0BA0
NEW 6ES7131-6BF01-0BA0 原价为：$61.00。当前价格为：$57.00。
Back to products
NEW 6ES7131-6BF00-0CA0
NEW 6ES7131-6BF00-0CA0 原价为：$61.00。当前价格为：$58.00。
-6%
Click to enlarge

NEW 6ES7131-6BH01-0BA0

原价为：$87.00。当前价格为：$82.00。

Calculate shipping price

Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.

Add to wishlist
Add to compare
Additional information
Weight 0.16 kg
Dimensions 10 × 10 × 8 cm
Reviews (0)
0 reviews
0
0
0
0
0

Reviews

Clear filters

There are no reviews yet.

Be the first to review “NEW 6ES7131-6BH01-0BA0”

Your email address will not be published. Required fields are marked *

Description

The 6ES7131-6BH01-0BA0 is a digital input module of the SIMATIC ET 200SP series from Siemens. Here is a detailed description:

 

  • Basic Information
    • Product Type Designation: DI 16x24VDC ST.
    • Usable Base Units: BU type A0.
    • Color Code: CC00.
    • Hardware Functional Status: From FS02.
    • Firmware Version: V0.0, and the firmware cannot be updated.
  • Power Supply Characteristics
    • Power Supply Voltage: The rated value is 24 V DC, and the allowable range is from 19.2 V DC to 28.8 V DC. It has reverse polarity protection.
    • Input Current: The maximum power consumption current is 90 mA.
    • Power Loss: The typical value of power loss is 1.7 W.
  • Digital Input Characteristics
    • Number of Digital Inputs: 16.
    • Input Type: Sink input (PNP, P – reading), which complies with IEC 61131, type 3.
    • Input Voltage: For signal “0”, it is – 30 to +5 V; for signal “1”, it is +11 to +30 V.
    • Input Current: For signal “1”, the typical value is 2.5 mA.
    • Input Delay: It is parameterizable, with values of 0.05/0.1/0.4/0.8/1.6/3.2/12.8/20 ms (plus 30 to 500 µs delay related to the wire length). The minimum value from “0” to “1” and from “1” to “0” is 0.05 ms, and the maximum value is 20 ms.
    • Wire Length: The maximum length of shielded wire is 1000 m, and the maximum length of unshielded wire is 600 m.
  • Diagnostic Function
    • It has diagnostic functions, including power – voltage monitoring, wire – break diagnosis (module – wide, with an optional circuit to avoid open – circuit diagnosis of a single sensor contact: 25 kΩ to 45 kΩ). The diagnostic information is readable, and there are diagnostic LEDs (green PWR – LED, green LED for channel status, green/red DIAG – LED for module diagnosis).
  • Configuration and Communication
    • It supports configuration in STEP 7 TIA Portal (since version V14), STEP 7 (since version V5.5 SP3), and PCS7 (since version V8.1 SP1). It also supports PROFIBUS and PROFINET fieldbuses, with the PROFINET version being GSDML V2.3 and the PROFIBUS version being GSD files of revisions 3 and 5 and above.