NEW 6ES7134-6HB00-0DA1

Basic Information

• Product Type Designation: AI 4xRTD ST, indicating 4 analog input channels specifically for resistance temperature detectors (RTDs), classified as a standard type.
• Usable Base Units: Compatible with BU type A0.
• Color Code: CC11.
• Hardware Functional Status: From FS02 onwards.
• Firmware Version: V0.0, which is not updatable.

Power Supply Characteristics

• Power Supply Voltage: Rated at 24V DC, with an allowable range of 19.2V DC to 28.8V DC. It includes reverse polarity protection.
• Current Consumption: Maximum current draw from the backplane bus is 60mA.
• Power Loss: Typical power consumption is 1.2W.

RTD Input Characteristics

• Number of Inputs: 4 (2-channel groups with galvanic isolation between groups).
• Supported RTD Types: Pt100, Pt200, Pt500, Pt1000 (platinum resistance thermometers) and Ni100, Ni1000 (nickel resistance thermometers), configurable per channel.
• Measurement Ranges: Dependent on RTD type, typically covering -200°C to +850°C for Pt100.
• Resolution: 13 bits (including sign bit).
• Accuracy: ±0.1% of measured value (typical) at 0°C to +100°C, with slightly higher tolerances outside this range.
• Wiring Options: Supports 2-wire, 3-wire, and 4-wire connections for RTDs, with 3-wire and 4-wire options enabling lead resistance compensation.
• Sampling Rate: 0.5kS/s (total for all channels).

Diagnostic and Configuration Features

• Diagnostics: Capable of monitoring power supply voltage, wire breaks in RTD circuits, and overrange/underrange conditions. Status is indicated via LEDs: green PWR-LED (power), green channel-status LEDs, and a green/red DIAG-LED (module diagnostics).
• Configuration: Channel-specific parameterization (RTD type, wiring type, measurement range) via TIA Portal; includes linearization and scaling of temperature values.

Configuration and Communication

• Supported by configuration tools including STEP 7 TIA Portal (from version V14) and STEP 7 (from version V5.5 SP3).
• Compatible with PROFIBUS and PROFINET fieldbuses, using GSDML V2.3 (PROFINET) and GSD files of revision 3 and 5 or higher (PROFIBUS).

Mechanical and Environmental Specifications

• Dimensions: 15mm width, 73mm height, 58mm depth.
• Weight: Approximately 30g.
• Operating Temperature: -30°C to 60°C when mounted horizontally; -30°C to 50°C when mounted vertically.
• Mounting Altitude: Up to 5000m, with derating requirements for altitudes exceeding 2000m.
• Electromagnetic Compatibility (EMC): Complies with relevant IEC standards for industrial environments, ensuring reliable operation in harsh electrical conditions.