NEW 6ES7132-6BF01-0AA0
NEW 6ES7132-6BF01-0AA0 原价为：$62.00。当前价格为：$58.00。
Back to products
NEW 6ES7132-6BF00-0CA0
NEW 6ES7132-6BF00-0CA0 原价为：$62.00。当前价格为：$58.00。
-6%
Click to enlarge

NEW 6ES7132-6BF01-0BA0

原价为：$62.00。当前价格为：$58.00。

Calculate shipping price

Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.

Add to wishlist
Add to compare
Additional information
Weight 0.16 kg
Dimensions 10 × 10 × 8 cm
Reviews (0)
0 reviews
0
0
0
0
0

Reviews

Clear filters

There are no reviews yet.

Be the first to review “NEW 6ES7132-6BF01-0BA0”

Your email address will not be published. Required fields are marked *

Description

The 6ES7132-6BF01-0BA0 is a digital output module from Siemens’ SIMATIC ET 200SP series. Here’s a detailed description:

Basic Information

  • Product Type Designation: DO 8x24VDC/0.5A ST, indicating it features 8 digital outputs with 24VDC voltage and 0.5A current capacity, classified as a standard type.
  • Usable Base Units: Compatible with BU type A0.
  • Color Code: CC02.
  • Hardware Functional Status: From FS02 onwards.
  • Firmware Version: V0.0, which is not updatable.

Power Supply Characteristics

  • Power Supply Voltage: Rated at 24V DC, with an allowable range of 19.2V DC to 28.8V DC. It includes reverse polarity protection.
  • Current Consumption: Maximum current draw from the backplane bus is 45mA (without load).
  • Power Loss: Typical power consumption is 1W.

Digital Output Characteristics

  • Number of Outputs: 8.
  • Output Type: Source output (PNP, P-switching), compliant with IEC 61131, type 3.
  • Output Voltage: For signal “1”, minimum 20.4V (at 0.5A load); for signal “0”, maximum 1.5V.
  • Output Current: Rated at 0.5A per channel, with a maximum of 0.5A per channel and 4A total for the module.
  • Residual Current: Maximum 10µA when in “0” state.
  • Load Resistance Range: 48Ω to 100kΩ.
  • Switching Delay: From “0” to “1” (turn-on) maximum 100µs; from “1” to “0” (turn-off) maximum 150µs (resistive load).
  • Switching Frequency: Maximum 100Hz for resistive loads, 2Hz for inductive loads, and 10Hz for lighting loads.
  • Wire Length: Maximum 1000m with shielded cables; maximum 600m with unshielded cables.

Protection and Diagnostic Features

  • Protection: Each channel includes short-circuit protection.
  • Diagnostics: Capable of monitoring power supply voltage and cumulative faults. Status is indicated via LEDs: green PWR-LED (power), green channel-status LEDs, and a green/red DIAG-LED (module diagnostics).

Configuration and Communication

  • Supported by configuration tools including STEP 7 TIA Portal (from version V14) and STEP 7 (from version V5.5 SP3).
  • Compatible with PROFIBUS and PROFINET fieldbuses, using GSDML V2.3 (PROFINET) and GSD files of revision 3 and 5 or higher (PROFIBUS).

Mechanical and Environmental Specifications

  • Dimensions: 15mm width, 73mm height, 58mm depth.
  • Weight: Approximately 30g.
  • Operating Temperature: -30°C to 60°C when mounted horizontally; -30°C to 50°C when mounted vertically.
  • Mounting Altitude: Up to 5000m, with derating requirements for altitudes exceeding 2000m.