NEW 6ES7132-6BD20-0DA0
NEW 6ES7132-6BD20-0DA0 原价为：$75.00。当前价格为：$71.00。
Back to products
NEW 6ES7132-6BF01-0BA0
NEW 6ES7132-6BF01-0BA0 原价为：$62.00。当前价格为：$58.00。
-6%
Click to enlarge

NEW 6ES7132-6BF01-0AA0

原价为：$62.00。当前价格为：$58.00。

Calculate shipping price

Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.

Add to wishlist
Add to compare
Additional information
Weight 0.16 kg
Dimensions 10 × 10 × 8 cm
Reviews (0)
0 reviews
0
0
0
0
0

Reviews

Clear filters

There are no reviews yet.

Be the first to review “NEW 6ES7132-6BF01-0AA0”

Your email address will not be published. Required fields are marked *

Description

The 6ES7132 – 6BF01 – 0AA0 is a digital output module of the SIMATIC ET 200SP series by Siemens. The following is a detailed description:

 

  • Basic Information
    • Product Type Designation: DQ 8×24 VDC/0.5A BA.
    • Usable Base Units: BU type A0.
    • Color Code: CC02.
    • Hardware Functional Status: From FS02.
    • Firmware Version: V0.0, not updatable.
  • Power Supply Characteristics
    • Power Supply Voltage: The rated value is 24V DC, and the allowable range is from 19.2V DC to 28.8V DC. It has reverse polarity protection.
    • Current Consumption: The maximum current consumption without load is 45mA.
    • Power Loss: The typical value of power loss is 1W.
  • Digital Output Characteristics
    • Number of Digital Outputs: 8.
    • Output Type: Source output (PNP, P – switching).
    • Output Current: The rated value for signal “1” is 0.5A, and the maximum allowable value for signal “1” is also 0.5A. The maximum residual current for signal “0” is 10µA.
    • Load Resistance Range: The lower limit is 48Ω, and the upper limit is 100kΩ.
    • Output Delay: When the resistive load is rated, the maximum value from “0” to “1” is 100µs, and the maximum value from “1” to “0” is 150µs.
    • Switching Frequency: The maximum value for resistive load is 100Hz, for inductive load is 2Hz, and for lighting load is 10Hz.
    • Total Current of Output Terminals: The maximum current per channel is 0.5A, and the maximum current per module is 4A.
    • Wire Length: The maximum length of shielded wire is 1000m, and the maximum length of unshielded wire is 600m.
  • Diagnostic Function
    • It has diagnostic functions, including power – voltage monitoring and cumulative fault monitoring.
    • There are diagnostic LEDs, including a green PWR – LED for power – voltage monitoring, green LEDs for channel – status display, and a green/red DIAG – LED for module diagnosis.
  • Configuration and Communication
    • It supports configuration in STEP 7 TIA Portal (since version V14), STEP 7 (since version V5.5 SP3).
    • It also supports PROFIBUS and PROFINET fieldbuses, with the PROFINET version being GSDML V2.3 and the PROFIBUS version being GSD files of revisions 3 and 5 and above.
  • Mechanical and Environmental Characteristics
    • Dimensions: The width is 15mm, the height is 73mm, and the depth is 58mm.
    • Weight: Approximately 30g.
    • Operating Temperature: When installed horizontally, it is from – 30°C to 60°C; when installed vertically, it is from – 30°C to 50°C.
    • Mounting Altitude: The maximum installation altitude is 5000m, but there are restrictions when the installation altitude is greater than 2000m.