NEW 6EP1437-3BA10

Electrical Specifications

• Input:
  • Voltage Range: 320–575V AC (3-phase), compatible with global industrial grids (nominal 400–500V AC) .
  • Frequency: 47–63Hz, supporting both 50Hz and 60Hz systems .
  • Input Current: 2.6A at 400V AC, 2.1A at 500V AC, ensuring efficient power draw across voltage ranges .
• Output:
  • Adjustable 24V DC: Rated at 40A (960W), with voltage adjustable from 24–28.8V DC to compensate for voltage drops in long cable runs .
  • Stability: ±1% voltage regulation under load, with low ripple/noise (≤100mV peak-to-peak) .

Performance & Power Management

• Power Boost: Delivers 3× rated current (120A) for up to 5 seconds to handle inrush currents from motors, solenoids, or high-startup devices .
• Efficiency: Achieves 92% efficiency at full load, minimizing energy waste and heat dissipation in control cabinets .
• Overload Handling:
  • Constant Current Mode: Maintains output at reduced current during sustained overloads.
  • Latch-Off Mode: Disables output until manual reset (selectable via DIP switch) for critical applications .

Protection & Monitoring

• Comprehensive Safeguards:
  • Overvoltage Protection: Triggers at ≤35V to shield downstream equipment .
  • Short-Circuit Protection: Automatic recovery after fault clearance or selectable latch-off .
  • Over-Temperature Shutdown: Self-resets once thermal conditions normalize .
• Status Indicators:
  • Green LED for normal operation; fault conditions (overload, overtemperature) are indicated via diagnostic signaling .
  • Optional signaling modules (e.g., 6EP1961-3BA00) enable remote monitoring and ON/OFF control .

Design & Installation

• Compact Footprint: Measures 150mm (W) × 125mm (H) × 150mm (D) with a 35mm DIN rail mount (EN 60715), saving space in control cabinets .
• Durable Construction: IP20-rated metal enclosure resists dust and mechanical stress, withstanding vibrations (10–57Hz, 0.15mm amplitude) .
• Scalability:
  • Parallel Operation: Supports load-sharing with up to 4 units for higher power (e.g., 160A with 4 modules) .
  • Redundancy Ready: Works with SITOP redundancy modules (e.g., 6EP1961-2BA00) for fault-tolerant systems .

Environmental & Compliance

• Operating Temperature: -25°C to +70°C (with derating above 50°C) for extended reliability in harsh environments .
• Storage Temperature: -40°C to +85°C .
• Certifications: CE, cULus, EMC compliance (EN 61000), and marine approvals (ABS, DNV) for global industrial and maritime use .
• EMC Performance: Meets EN 55022 Class B standards, minimizing interference with nearby equipment .

Typical Applications

• Powering PLCs, HMIs, and distributed I/O systems in manufacturing lines.
• Supporting high-current devices like servo drives, robotics, and large sensor networks.
• Critical infrastructure requiring redundancy (e.g., chemical plants, energy production facilities) .

Key Benefits

• Universal Input: Adapts to global three-phase grids without additional converters.
• Adjustable Output: Mitigates voltage drops in long cable runs.
• High Efficiency: Reduces energy costs and extends component lifespan.
• Robust Protection: Safeguards both the power supply and connected equipment.

Notes

• Discontinuation Status: This model is marked as discontinued in some sources , with Siemens’ SITOP PSU8200 series (e.g., 6EP1437-3BA10) serving as the successor. Users are advised to verify availability and consider newer alternatives for future projects.
• Series Classification: While primarily associated with the PSU8200 series, some references link it to the PSU300M range, reflecting potential legacy designations .